Updated November 2026
The babyletto hudson 3 in 1 crib is a convertible crib that moves from a standard crib to a toddler bed and then to a daybed or full-size bed frame, depending on the conversion kit you add. This guide explains what each stage requires, how to confirm the crib fits your room and mattress, and which safety checks matter before your baby sleeps in it. For a deeper look, Grist House Beer Crib: What It Is and How It Works covers this in detail.
Understand the Three Stages
Most convertible cribs of this type are sold as one frame that changes shape over time. In the first stage, the crib sits at its highest rail setting with the mattress at the top position, which keeps the baby contained while they are still pulling up. Later, you lower the mattress and remove one side rail to create a toddler bed. The final stage uses a conversion kit to turn the frame into a daybed or small bed. Manufacturers specify which conversion kits are compatible, so check the product listing before you assume a kit will fit.
If you plan to use the bed past the crib years, read the age and weight limits for each stage in the manufacturer’s manual. For a wider look at how these stages compare across models, see Convertible Crib Guide: Stages, Kits and What to Check.
Check Mattress and Room Fit
The mattress is where most fit problems start. A crib mattress must fit snugly inside the frame, with no gap larger than two fingers between the mattress and any side. Measure the inside length and width of the frame, then compare those numbers with the mattress dimensions in the product specs. Standard crib mattresses are usually around 52 inches by 28 inches, but confirm the exact size the manufacturer lists for this model.
Also measure the room. Allow at least 24 inches of clear space around the crib so you can reach the baby from three sides, and keep it away from windows, blind cords, and wall decorations that could be pulled in.
Confirm Safety Requirements
Before using the crib, confirm that it meets current federal crib standards and that the label shows the required certification. The rail spacing should be no more than 2 3/8 inches between slats, and there should be no cutouts in the headboard or footboard where a child’s head could get caught. Check that all hardware is tight and that the mattress height is adjusted correctly for your baby’s age. For a plain-language summary of what current rules cover, read Crib Safety Standards: What Current Rules Cover.
Use only a firm, flat mattress and a fitted sheet made for that size. Keep pillows, bumpers, blankets and soft toys out of the crib. If you have questions about your baby’s sleep setup or any medical concerns, consult your pediatrician.
Compare It With Other Sleep Spaces
If you are still deciding between a full crib and a smaller option, weigh the space you have, how long you expect to use the bed, and whether you travel often. A mini crib or play yard may suit a small apartment or frequent trips better. Mini Crib Guide: Who They Suit and What to Check and Crib vs Bassinet vs Play Yard: Which Sleep Space Fits Your Family compare these options side by side.
Recommended gear
A fitted crib sheet that matches the mattress size keeps the mattress surface snug and safe.
A waterproof crib mattress protector helps protect the mattress from accidents without adding bulk under the baby.
A tape measure lets you check the frame and room dimensions before you order or move the crib.
Tips
- Measure the mattress and frame before ordering a mattress, since a slightly undersized one creates a dangerous gap.
- Check the rail spacing and corner posts after every assembly step and after each conversion.
- Read the manual’s weight and age limits for each stage and move to the next stage only when your child meets them.
- Tighten all bolts every few months, since loose hardware is common with convertible frames.
- Keep the crib at its highest setting until your baby can sit up and pull up, and lower it promptly after that.
FAQ
Can I use any crib mattress in the babyletto hudson 3 in 1 crib?
No. Use a mattress that matches the listed interior dimensions and fits with no gap larger than two fingers. Check the manufacturer’s specs before buying.
When should I convert the crib to a toddler bed?
Convert when your child is taller than the crib rails or can climb over them, and follow the age and size limits in the manual. Converting too early can raise the risk of falls.
Do I need a conversion kit to use it as a toddler bed?
The toddler bed stage usually needs only the lowered mattress and one removed side rail, but the daybed or full bed stage requires a separate conversion kit. Confirm the kit is compatible with your model.
Conclusion
The babyletto hudson 3 in 1 crib can grow with your child if you match the mattress, measure your room, and follow the stage limits in the manual. Check safety standards and hardware before each stage change. For a final check on your setup, consult your pediatrician or the manufacturer’s support team.
Related reading
- Pack and Play Crib Guide: Setup, Safety Checks and Buying Tips
- Flannel Sheets for Crib: How to Choose Safe, Warm Bedding
Ready to choose one?
