Updated November 2026
The Benton 5 in 1 convertible crib by Graco is a crib that converts through five stages, from a standard crib to a toddler bed and then a full-size bed frame. This guide explains how each stage works, what to measure in your room, how to set it up, and which safety checks matter most. Use it to decide whether this model fits your space and your timeline.
What the Five Stages Mean for Your Timeline
Most convertible cribs share the same general progression, and the Benton follows it. Manufacturers describe the stages roughly as crib, toddler bed, daybed or bench, and full-size or twin-size bed. The exact conversion steps depend on the kit you buy, so check the manual for which rails and components come with your model. For a broader look at how these stages compare across models, see Convertible Crib Guide: Stages, Kits and What to Check.
Shopping for one? See our guide: 6 Best Convertible Car Seats: Top Picks Compared for 2026.
Plan around the point where your child outgrows the crib. Many families convert to a toddler bed when the child can climb over the rail, which is the main signal to switch. Because the crib is designed to last for years, it can also serve as the long-term bed in a single room.
Measure Your Room and Mattress Before You Buy
- Measure the floor area where the crib will sit, including clearance for the door and any dresser or changing table.
- Check the crib’s outer dimensions in the manufacturer’s specification sheet and compare them against your measurements.
- Confirm the mattress size. A standard crib mattress is required for the crib stage, and a different size is typically needed for the later stages. Check the manual for the correct mattress dimensions and thickness.
- Look for at least 2 inches of clearance between the top of the mattress and the top rail, and make sure the mattress fits snugly with no gap at the sides.
A snug mattress is a safety requirement, not a preference. Any gap between the mattress and the frame can trap a child’s head or limbs. Use only the mattress the manufacturer specifies.
Set Up the Benton Safely
Assemble the crib on a hard, flat floor, and keep the included hardware bag and manual within reach. Tighten every bolt and check the hardware periodically, since joints can loosen with regular use. Keep the crib away from windows, cords, wall hangings and anything a child could reach from inside.
Converting to Later Stages
Only convert the crib by following the manufacturer’s steps and using the components listed for your model. Do not improvise with parts from another brand. For general guidance on current crib rules, read Crib Safety Standards: What Current Rules Cover.
Compare Options Before You Commit
If you are still deciding on a sleep setup, it helps to compare the Benton against other sleep spaces, such as a bassinet or play yard, based on how long you need the product and how much room you have. The article Crib vs Bassinet vs Play Yard: Which Sleep Space Fits Your Family walks through those trade-offs. A Pack and Play Crib Guide: Setup, Safety Checks and Buying Tips may also suit families who want a portable backup.
Checklist Before Your First Night
- Confirm the mattress is the exact size specified for the crib stage.
- Check that all bolts and joints are tight.
- Verify there is no gap between the mattress and the frame.
- Keep bedding minimal: a fitted sheet only, with no pillows, bumpers or loose blankets.
- Place the crib away from window cords and wall decorations.
Recommended Gear
A fitted crib sheet designed for the mattress size helps keep the sleep surface firm and snug. View on Amazon
A crib mattress protector that fits your exact mattress dimensions helps keep the surface dry without adding loose layers. View on Amazon
A small bubble or ruler tool can help you check the clearance between the mattress and the rail during setup. View on Amazon
Common Mistakes to Avoid
- Using a mattress that is too small or too thick, which leaves dangerous gaps.
- Skipping the periodic bolt check, since loose hardware weakens the frame over time.
- Converting to a toddler bed too early, before the child is ready.
- Adding pillows, bumpers or stuffed animals to the crib.
- Assembling the frame on a soft or uneven surface.
FAQ
Is the Benton 5 in 1 convertible crib by Graco the same as other Graco convertible cribs?
It shares the general convertible design of Graco’s crib line, but the components and conversion steps depend on the model. Always check the manual for your exact version.
What mattress does the Benton need?
Use the mattress size and thickness listed in the manufacturer’s specifications for the crib stage. A different size is usually required for later stages.
When should I convert the crib to a toddler bed?
Many families convert when the child can climb over the rail or reaches the height limit listed in the manual. Consult the manufacturer’s guidance and your pediatrician for the right timing.
Conclusion
The Benton 5 in 1 convertible crib by Graco can serve a child across several years if you measure your room, use the correct mattress and follow the conversion steps. Check the manufacturer’s current specifications and safety guidance before you buy or convert. Confirm details with the official source for the most accurate information.
